Showing posts with label dipole. Show all posts
Showing posts with label dipole. Show all posts

Friday, July 23, 2010

I’d like to set up a 30-meter antenna in my back yard ...

Q I’d like to set up a 30-meter antenna in my back yard, but I’m really tight on space. I’ve been told that I can use a technique known as ‘linear loading’ to reduce the size of a dipole. Can you enlighten me?


A What you’ve heard is true—linear loading can significantly reduce the required lengths of resonant antennas. For example, it is easy to make a resonant antenna that is 30 to 40% shorter than an ordinary dipole for a given band. The shorter length comes from bending back some of the antenna wire. The increased self-coupling lowers the resonant frequency.

NN0F constructed a linear-loaded dipole using 25-feet of common 450-Ω ladder line and capacitive end hats (see Figure 1). The end hats are simply 6-foot lengths of stiff wire. Both conductors of the ladder line at each end are soldered to the hat wires. At the middle of the antenna (12 feet 6 inches from the ends) you cut through one of the ladder line conductors and attach your 50-Ω coaxial feed line. Cut through the other conductor as well, but leave it open. This antenna should provide a good match (no tuner required) and it fits easily within most back yards.

















Figure 1—A two-wire linear-loaded antenna for 30 meters using 450-Ω ladder line.

From QST July 2000
 

Sunday, July 4, 2010

Could someone be injured by touching the ground side of a coaxial-fed dipole antenna when I am transmitting at 100 W? ...

Q Vince, KR3O, asks, “Could someone be injured by touching the ground side of a coaxial-fed dipole antenna when I am transmitting at 100 W?

A Most definitely! There really is no such thing as a “ground” side to a dipole. Although one side of your dipole is connected to the shield that goes to ground at the shack end, this is a “ground” for dc only. There is plenty of RF voltage present on that side of the dipole—enough to get your attention with a painful burn.


From QST November 1999

Thursday, June 24, 2010

I’d like to feed a dipole above my roof using my antenna tuner and a balanced feed line ...

Q Larry Amann, K5TQN, asks, “I’d like to feed a dipole above my roof using my antenna tuner and a balanced feed line. However, my roof is metal and the feed line would have to rest on it for a considerable distance. I know that you need to keep open-wire feeders away from metal, but this is not possible in my case. Could I make my own shielded balanced line by using two lengths of coax in parallel?”

A
The idea of using two parallel lengths of coax to create a kind of “shielded” balanced feed line has a long history. A number of hams have used this approach in situations where they needed to pass a balanced feed line over an expanse of metal, such as a metal roof. The technique involves placing two coaxial cables in parallel (using tape or cable ties to keep them firmly together along the entire length), shorting the shield braids of both coaxial cables at both ends, and grounding the “shack side” of the braids at your antenna tuner (see Figure 1). The inner conductors of the coax then become your “shielded” parallel feed lines.

The primary drawback with this technique is that you will not enjoy the same degree of low-loss performance as you would with standard twin-lead or ladder line. On the other hand, it should allow you to maintain a balanced line all the way to your antenna, despite your metal roof.



Figure 1—You can make a shielded balanced feed line out of two pieces of coaxial cable. It won’t have the same low-loss characteristics of open-wire or ladder line, but it is a workable alternative when the feed line must pass over a large metal surface.

From QST May 1999